Tracing command in MSS

IMSI Analysis for Inroaming in MSS

ZCFC:IMSI= 72431,IMSIINDIC=2,PLMN=PCS_BRAZIL,TOA=GT,:NP=E214,TON=INT,SRD=1,NRD=5,

SAD=1,DIA=55031,:;   --- To create IMSI analysis

ZCFI:TYPE=IMSI:DIG=72431:ALL; ---- To see the o/p of the analysis

ZMXP:NAME= PCS_BRAZIL;  --- To see PLMN parameters and check the Supported CAMEL Phaze

IMSI NUMBER ANALYSES

IMSI             IMSI  PLMN             GT               NP     TON  NI   SPC

NBR.             IND.

72431              2   PCS_BRAZIL       55031            E.214  INT  -    -  

NUMBER MODIFICATION RULES: START POINT OF REMOVED DIGITS :   1

                           NUMBER OF DIGITS REMOVED      :   5

                           START POINT OF ADDED DIGITS   :   1

                           ADDED DIGITS                                  : 55031            

ZCFD:TYPE=IMSI:DIG=72431;    ---- To delete imsi analysis

From the IMSI analysis o/p check the GT analysis properly with command ZNBI:::55031;

Tracing command in MSS

ZMWC:MSISDN=919716098909:REF=122,:;   -   To activate trace of a number  in MSS

Then give command ZQNS;   - to see in which VTP you have logged in. This command shows the command you fired last.

< ZQNS;

LOADING PROGRAM VERSION 12.4-0

MSCi      MSS01_GGN                 2009-03-16  14:15:35 PAGE      1

SYSTEM              USERNAME  USER                USER        MML  SESSION

                              SYSTEM              I/O-DEVICE       NUMBER

220366 MSS01_GGN    SYSTEM    220366 MSS01_GGN    OMU-VTP20   RI   01244

                                       SYSOP1    220366 MSS01_GGN    OMU-VTP15   QN   01237

COMMAND EXECUTED 

From above o/p  the logged VTP would be  VTP-15 , because in its right side it is showing QN command which you fired last.

Then give the command -    ZIIS::GSMME1PR::DEV=VTP-15; 

LOGICAL FILE MODIFIED:

SYSTEM = MSS01_GGN   UNIT = OMU

 PAGE      1

LOG       LOG       SPARE  PHYSICAL           OBJ  SYSTEM     UNIT    DEVICE/

FILE      FILE      FILE   FILE               IND   NAME      NAME    LOGICAL

NBR  NAME  &  CLASS MODE   NAME                                        FILE

  93 GSMME1PR    P       /TRACE/                1 MSS01_GGN   OMU     WDU-SB   

                          GSMME1PR.TXT,0              2 MSS01_GGN   OMU     VTP-23   

                         (** RING FILE **)                   3 MSS01_GGN   OMU     VTP-15   

COMMAND EXECUTED

Please note! In device list WDU-SB should be always connected to OMU. At a time max 4 devices can be connected one is WDU-SB of OMU and three are different VTP or LPT.

If you find that 4 devices are already connected and you want to connect another device then you have to give the followind command:-

ZIIS::GSMME1PR:IND=3:DEV=VTP-15;

In this case IND=3 position VTP would be disconnected and new VTP would be added.

You can also give IND=2 or IND=4 according to the situation. Please do not disconnect the   WDU-SB  from OMU.

We can also take trace using the below mentioned command at  the time of call test

ZMCJ:IMSI=::TYPE=D; 

X � - p 6 �� s'>    SYSTEM    220366 MSS01_GGN    OMU-VTP20   RI   01244

                                       SYSOP1    220366 MSS01_GGN    OMU-VTP15   QN   01237

COMMAND EXECUTED