Mostly use BSC COMMANDS

NOKIA BSC COMMANDS

1.                ZEEI ;                          - used to show the status of all sites in BSC

2.               ZEEI :BCF=(bcf no);   - used to check status of  particular BCF

3.           ZEOL:(BCF NO);       - used to check alarm of  particular Site.

4.                ZQSI ;                         - used to check status of  X.25 link

5.                ZNEL;                        - to check status of all TCSM.

6.           ZEFS:(bcf no):L/U;     - used  to  lock/unlock   BCF.

7.           ZEQS:BTS=(BTS no):L/U;   - used to lock and unlock sector.

8.           ZERS:BTS=(BTS no):TRX=(TRx no):L/U; Used to lock/unlock individual TRx

9.           ZEFR:BCF NUM:OMU/SITE; OMU/SITE RESET

10.              ZAHO:ET,(ET.no) ;   - To check alarm on ET. 30,37

11.              ZUSC:ET,E.no:BL/WO;  - Used for making ET block and working.

12.              ZDTF:TCSM,E.no ;  - State checking of ET.

13.              ZEEL;   -To see no. of calls continuing in a BSC

14.              ZAHO;  -To see all BSC related alarm

15.              ZEOL:(BCF no);  -To see all alarm related to one BCF

16.              ZEOH:::BCF=BCF num; To see  alarm history of a site

17.              ZEOL::NR=7706;  -To see all sites having OMU blocked

18.              ZEOL::NR=7704;  -To see all sites having PCM blocked

19.              ZEOL::NR=7705; -To see all sites having LAPD failure

20.              ZEOL::NR=7411; -To see all  sites on  battery

21.              ZQUS(Enter twice):BCF=(BCF no):TRE=1:2;7(Enter)1(Enter)200(Enter) - To know the              receiving power of  a PDH link :ODU:

22.              ZEEL:BCF(Enter)Select Option;  -To know the blocked BCF/BTS/TRx category

21.       ZIGO;  - To know the MML application done with BSC since the last two remote session

23.              ZYEF:ET,(ET no);  - Checking loop in ET

24.              ZEOH:yy-mm-dd:hh-mm-ss:bcf=(bcf no); - Alarm related to particular date and time

25.              ZYMO:ET,E.no ;   -  to check slips on  ET

26.              ZZZZ; - to terminate a   remote  session

27.              ZDSB:::PCM=(ET no); - To find BCF no from a ET no/ Shows  D channel details

28.              ZDTI:::PCM=(ET num);  -To find D channel details

29.              ZEOH::NR=7767; -To see the alarm num history  in  BSC for the last 00.00.00 hours

30.              ZEOL::NR=7767;  -To find out the  sectors down  in one BSC

31.              ZQSC(ENTER)

       QSC:0(ENTER)

       QSC:0,UNL;(ENTER)

                                                    Command to change physical address

           ZQSC(ENTER)

      QSC:1(ENTER)

      QSC:1,UNL;(ENTER)

32.              ZQLG(ENTER)

           QLG:0(ENTER)

           QLG:0;X2(ENTER)

           QLG:0:X25:UNL;(ENTER)

                                                            Command to change linkage

           ZQLG(ENTER)

           QLG:1(ENTER)

           QLG:1;X2(ENTER)

           QLG:1:X25:UNL;(ENTER)

Comment-  If  the X.25 link of BSC is locked from remote end the this command is used to unlock the X.25 link  from local BSC end. Then both the command (28,29)  should   be executed

33.              ZDSB:::PCM=(ET NO);  To know wheather  a ET  is in use or not   in use

34.              ZWUP:ET NUM;    - To know a   ET type(TCSM/Abis)      

35.              ZQNI;                      -To know the numerical  ID of a BSC   

36.              ZQRI:OMU;            -To know  the local IP allotted to BSC

37.              ZAHP:::yyyy-mm-dd;  -To know the alarm history of  BSC

38.              ZERO:BCF=(BCF  NUM);  -To know the TSC value for each trx

39.              ZQWL:BCF=76;  TO know the Q1 address of FIU s present in a  site

40.              ZEFO:BCF ID:IOP;  To know the alarm configuration in a bts site

41.              ZEFX:BCF NUM:INBR=alarm number:POL=OPEN/CLOSE; To change polarity of an external  alarm

42.              ZEFE:  -External  Alarm text modification command

43.              ZDTC: D-channel name: BL/ WO; To change the state of D-channel

44.              ZERC: Trx creation

45.              ZERD: Trx Deletion (trx should be locked before deletion)

46.              ZDSE:  Lap-D creation